The ELAD® Dual-Axis Inclinometer, is a Dual-Axis family of Inclinometers, well positioned at the hi-end dual-axis systems providing servo-level performances at a much lower price point. Unlike MEMS-based sensors, the ELAD® is based on well-proven micro-capillary capacitive technology, featuring superior long-term stability and non-Linearity to assure best performance possible at this level.
Dedicated Hi Performance Analog-to-Digital converter provides the necessary analog front-end in terms of hi-resolution, non-linearity and temperature compensated measurements. Built-In Hi Performance µController handling all compensation and
computation tasks along with the communication protocol.
Dedicated mathematical modeling and calibration procedure taking care of Temperature compensation, Scale-Factor, Cross-
Axis, to assure high-performance results at various changing environmental conditions.
Hi Precision System, down to < 1mRad over Temp Range
Exceptional long-term stability
Wide Range of voltage supply (9-32 VDC)
Low-Power consumption
Mil-Spec Compliance
Antenna Alignment
Platform Leveling
Optical Observation Systems
Radar leveling
Pedestals alignment
| Paramater | Value (Typical) | ||
|---|---|---|---|
| Measuring range | ±10° | ±30° | |
| Resolution | < 0.001° | < 0.003° | |
| Accuracy | < 0.02° | < 0.03° | RMS, at room temp |
| < 0.05° | < 0.06° | RMS, over -10°C to +60°C | |
| Linearity deviation | < 0.05 % | < 0.03 % | |
| Repeatability | < 0.001° | < 0.003° | |
| Hysteresis | < 0.001° | ||
| Frequency | 3 Hz (-3dB, Typical) | ||
| Temperature drift of sensitivity | < 50 ppm / °C (typical) | ||
| Temperature drift of zero point | < 1 arc-sec / °C (typical) |
| Supply Voltage | 9V - 32V DC |
| Current Consumption | < 150 mA |
| Start Up Time | < 500 mSec |
| Communication Interface | RS232 (optional RS422) |
| Baud Rate | 4,800 - 115,200 bps |
| Output Rate | up to 10 frames / sec |
| Dimensions | 150 x 110 x 70 mm |
| Weight | < 1.4 Kg |
| Power/Data Connectors | Deutsch DTS24W15-35PN |
| Temperature | -40º C to +85º C | Mil-Spec 810-G Method 501.5 Procedure II |
| Humidity | 95% non-condensing | Mil-Spec 810-G Method 507.5 Procedure II |
| Shock | 20g, 11 msec ½ Sine | Mil-Spec 810-G Method 516.6 Procedure V |
| Vibration | 6.5 grms, 5-800 Hz | Mil-Spec 810-G Method 514.6 Procedure I |
| Enclosure | IP67 | EN 529 |
| Rain | Mil-Spec 810-G Method 506.5 Procedure I | |
| Dust | Mil-Spec 810-G Method 510.5 Procedure I | |
| Salt/Fog | Mil-Spec 810-G Method 509.5 | |
| Power Supply | MIL-STD-1275B | |
| EMI/RFI | MIL-STD-461C/D | |
| MTBF | > 100,000 hours according to Mil-HDBK 217 |
Leave your details and we will get back to you as soon as possible:
