The 3Dcube® is family of ultra-miniature Tactical-Grade Tri-Axis Accelerometers developed to support wide range of application within severe harsh environments.
The super-compact ultra-miniature design along with it's high technical performance makes the 3Dcube® suitable candidate for demanding applications like flight tests & recording, vehicle vibration road tests, aerial vibration testing, structural dynamics and many more.
The 3Dcube offers exceptional performances suitable for demanding applications, like very low VRE (Vibration Rectification Error) suitable for high vibration environments ,also, the out-of-plane measurement principal assures low cross-axis values.
The 3Dcube is calibrated for Temperature, Bias, Scale-Factor and more upon request.
High Performance Tactical Grade Accelerometers
Very Low VRE (= Vibration Rectification Error)
DC Response, Differential Mode/Single-Ended
Individual sensor calibration
Low Power < 200mA @ 12 VDC
Miniature, Light Weight
Vibration Analysis for UAV/UGV
Flight Data Acquisition Systems
Portable Data Acquisition Systems
| AZM3002 | AZM3010 | AZM3030 | AZM3070 | Remarks | |
|---|---|---|---|---|---|
| Full Scale Range | ± 2g | ± 10g | ± 40g | ± 70g | |
| Bandwidth | 0…500 Hz | 0..1000 Hz | 0…2000 Hz | 0…2400 Hz | -3dB point |
| Sensitivity (Differential) | 1,200 ± 4 mV/g | 240 ± 4 mV/g | 60 ± 2 mV/g | 34 ± 2 mV/g | |
| Noise Density | < 30 µg/√Hz | < 20 µg/√Hz | < 20 µg/√Hz | < 25 µg/√Hz | |
| Resolution | 3 µg | 30 µg | 100 µg | 100 µg | |
| Non-Linearity | 0.2 % | 0.2 % | 0.2 % | 0.2 % | % of Input (1σ) |
| Bias | |||||
| - Calib Error | 3 mg | 15 mg | 60 mg | 110 mg | |
| - Temp Error | 110 µg/°C | 165 µg/°C | 450 µg/°C | 800 µg/°C | |
| - Residual | 375 µg | 500 µg | 900 µg | 1,600 µg | |
| Scale Factor | |||||
| - Temp Error | 65 ppm/°C | 65 ppm/°C | 65 ppm/°C | 65 ppm/°C | |
| - T Residual | 120 ppm | 120 ppm | 120 ppm | 120 ppm | |
| VRE | 250 µg/g2 | 80 µg/g2 | 25 µg/g2 | 15 µg/g2 | |
| Cross-Axis | < 1 mRad | < 1 mRad | < 1 mRad | < 1 mRad | |
| Recovery Time | < 50 msec | < 50 msec | < 50 msec | < 50 msec |
| Interface | Analog, Differential / Single-Ended |
| Latency | < 100 µsec |
| Start-Up Time | < 1 msec |
| Output | 2.5 ± 2.4 VDC |
| Input Voltage | 9 VDC - 36 VDC |
| Power Consumption | < 200 mA @ 12 VDC |
| Connectors | Micro D-Type, 9-pin |
| Size | 25 x 25 x 22 mm |
| weight | < 40 gr |
| Temp Operation | -40º C to +71º C | Mil-Spec 810-G Method 501.5 Procedure I |
| Shock | 500g, 3 msec ½ Sine | Mil-Spec 810-G Method 516.6 Procedure V |
| Vibration | 12 G rms, 20-2000 Hz | Mil-Spec 810-G Method 514.6 Category 17 |
| Altitude | 70,000 feet | Mil-Spec 810-G Method 500.5 Procedure III |
| Enclosure | IP65 | EN 595 |
| MTBF | 50,000 Hours | Mil-HDBK 217 |
Leave your details and we will get back to you as soon as possible:
